MHZ Bandit
|
Manufacturer: MHZ
Type: Bandit
Length x Width:
Weight:
Owner: Mario Verweij
Build by: Mario Verweij & Peter van Leeuwen.
|
| Motor: Zenoah 260
Hardware: MTC
Prop: ABC MW-3
Electronics:
Steering Servo: Mutliplex Rhino, Gas servo: Robbe S3001.
Reciever: Futaba 113ip.
Reciever batterie: 5 cells Interlect 1400mah.
Topspeed: Not masured jet.
|
 |
The time has come for me to build a new gas powerd boat.
After my formal bad experience with gas powerd boats i desided for a longer time to stay by electro powerd boats, but now a new time has come to try it again for a second time.
And it become the MHZ
Bandit.
Why shall some persons ask.
Just because i have seen run some, and the realy goes like crasy. Reach high speeds, good to play, and almost easy to handel.

|

|
Laminated the motor mounts. |
Measuring the holes for the strutt holder. |

|

|
Here we bore the breaches, |
Made in the hole for the drive shaft. |

|

|
Laminat the drive shaft. |
With the motor in place, and the flex in it,
it's much easy'er. |

|

|
Mounting on the hardware. |
Placed the auto-bailers in the hull.
And the tube for the water cooling. |

|

|
Measuring the place of the radio-box. |
Mounting in the steer servo plate. |

|

|
The Radio-box allmost ready. |
Ready for mounting in. |

|

|
Gasoline tank in place, so the motor could also
mounted in. |
The steering rod mounted, and the watercooling
hose placed. |

|

|
Fuel hose mounted. |
Exhaust pipe fitted in. |

|

|
Decor for the cockpit. |
Cap fit on the hull. |

|

|
Allmost ready for the first test run. |
Yes finaly ready!!. |

|

|
Peter is going to do the first run with it. |
And of she goes. |

|

|
Just a small run to check everything.. |
And good she steer well. No trim needed. |

|

|
Look at the speed!! and that for a non tuned
engine. |
|

|

|
|
|

|

|
|
|

|

|
|
|

|

|
|
And back on shore. |

|

|

|

|
|
(Special thanks to Niek (Tonny) for making the action Pictures!!)
Hopefull i'm ready next time to run the boat my self.
And make some more action pict's.
Keep you update about this new and joy full project.
|