Christonn 1/8 Hydro, Quickdraw Powered
 |
Manufacturer:
Cristonn Name: Twin wing Unlimited Hydro LxBxH: Weight: Owner: Peter van Leeuwen |
| Engine: Quickdraw front intake, Rear exhaust 25 cc. |
 |
Comments will follow soon.
|
|
|---|---|
| engine fits barely into the hull. |
MTC strut, with homemade pocket. |
|
|
Most material used for building are Carbon sheets from 1 mm up till 3 mm. |
Servobox for rudder servo . |
|
|
Made to fit the hull. |
Trial fitting the wing. |
|
|
Wiring for the reciever and ignition battery. |
Rudder servo in the box with linkage |
|
|
Reciever battery. |
Ignition battery. |
|
|
Ready for the first trial runs . |
First runs with a ABC 2614 went really well. |
|
|
| still a bit too forward wit the CG. |
loose the ballast in the nose !! (too wet ...). |
Now its time to paint: |
|
|
 |
Time for painting. |
Peter is doing his best to do it good. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
This site is sponsored by:
2 Brothers R/C, Bussum.
All rights reserved.